Table of Contents
Advertisement
Trapped item detection
If an item is detected to be trapped between
the door and the door gasket, the washer
will pause the cycle and play an alert chime.
The LED will display a loop of "CLEAr door"
as shown below until the cancel button is
pressed. Press the cancel button to unlock
the door and remove the trapped item, then
close the door and restart the cycle.
(60 sec loop)
(60 sec loop)
Door stand ventilation
Help prevent odor buildup and reduce
humidity between washes by utilizing your
washer's door stand ventilation feature.
Open the door, locate the stand below the
door latch and rotate the stand counter-
clockwise to unlock it.
NOTE
If unable to rotate the stand by hand, a coin
or flat blade screw driver can be used.
The stand is spring loaded and will extend.
Rotate it clockwise to lock in the extended
position.
1
To disengage the stand, rotate to unlock, push
the stand in and rotate to lock position.
NOTE
If door stand will not turn to locked
position, fully turn it to unlock position and
try to lock again.
CONTROLS AND SETTINGS
2
3
31
Advertisement
Table of Contents
