Kenwood KR-V6020 Instruction Manual page 21

@ Tuner control keys
TUNER
BAND P.SCAN
These keys allow the same operations as the keys with the
same names on the receiver.
@ Tape deck control keys
TAPE
SoD
TAPE A TAPE B
Co Co oo
TAPE
A/B
The KX-5010 and the KX-9010 (models only for Europe)
can be remotely controlled by connecting with the sys-
tem control cables.
When remote control cannot be performed even if the
unit is connected with a system control cable, press the
TAPE A/B switch and try it again.
These keys allow the same operations as the keys with the
same names on the tape deck A or B.
Note:
When the Fast Forward key| >> jis to be pressed after the Rewind
key [<< | was pressed, press the Stop key (| first, then press the
Fast forward key
@ Input selector keys
cD PHONO TUNER
TAPE 1 TAPE 2 VIDEO 1 VIDEO 2
EJ
These keys have the same functions as the input selector keys
on the receiver.
@ POWER key
Switches the power of the receiver to ON/STAND-BY (OFF).
Mi Volume level keys
(aes
VOLUME CONTROL keys:
Pressing the [A] key rotates the VOLUME CONTROL on the main
body of the unit clockwise to increase the volume, and press-
ing the [V] key rotates it counterclockwise to decrease the
volume.
MUTE key:
The MUTE key is not provided on the main body. The muting
can be controlled only from the remote control.
To mute the sound temporarily
Press the MUTE key on the remote control unit.
@ The point indicator on the VOLUME CONTROL knob
blinks, and the output sound is muted.
®@ The muting is canceled when the MUTE key is
pressed again or the VOLUME [A] or [Vv] key is pressed.
@ When the muting is canceled, the point indicator on
the VOLUME CONTROL knob stops blinking and starts
to light steadily.
Malfunction may occur in case direct sunlight or the light
of a high-frequency lighting fluorescent lamp enters the
remote control light recepter. In such a case, change the
installation position of the unit so that the malfunction
does not occur.
KR-V6020 (En) 21
i
|
j
1