Yamaha AG200FEE 2014 Owner's Manual page 28

INSTRUMENT AND CONTROL FUNCTIONS
1
With the engine turned off:
1. Make sure that the engine stop switch is set to "
2. Turn the key to "ON".
2
3. Shift the transmission into the neutral position.
4. Push the start switch or push the kickstarter lever
3
down.
Does the engine start?
4
5. Turn the engine off.
5
6. Shift the transmission into gear.
7. Keep the clutch lever pulled.
8. Push the start switch or push the kickstarter lever
6
down.
Does the engine start?
7
8
The system is OK. The motorcycle can be ridden.
9
10
11
12
".
YES NO
NO
YES
WARNING
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
4-12