Troubleshooting; Physical Keyboard Does Not Type Proper Characters - Hitachi PC-ARF Technical Catalogue

Hide thumbs Also See for PC-ARF:

Table of Contents

6 Building air conditioning controls

CSNET Manager LT/XT

6.2.6 Troubleshooting

In case that want to connect a USB keyboard and it does not fit to the keys maps of the system, change the keyboard layout

by following that instructions:

1 Connect a USB mouse

2 Close the program (Local computer configuration -> touch screen settings -> close)

3 Right click on the "GB" icon on the top of the desktop and select "Keyboard layout handler settings" option.

4 Inside the keyboard layout handler, find your language flag on the list. If it does not exist, add it.

5 Move your flag to the top of the list with the button "up". This will make your keyboard layout the default option each

time that you will connect a new one.

6.2.6.2 Use of system tray

If user close the window using the cross button, application will still run setting an icon on the system tray.

Clicking twice over the system tray icon will open the application. Using right button of the mouse over it will open a little

menu that will allow to the user between close completely the application or open it.

User will normally have the application closed on the system tray, because it will not be always managing things. But having

that icon there will be so useful due to the alarm notification.

When an alarm occurs system tray icon will switch to red colour and it will be like this until alarm will be disappeared. Alarm

displaying message should be activated on the user configuration.

First time than alarm occurs it will appear a system notification showing that this alarm has been appeared with the alarm

code and unit address.

Alarms could also be watched on the alarm led of the virtual remote control or on the units list.

TCGB0106 rev.0 - 12/2014

Alarm Description:

Unit [Port: 1, Ou: 11, Iu: 1] - > Alarm Code: 99