Installation - Hitachi PC-ARF Technical Catalogue

4 Individual remote controls
Receiver kit for wireless remote control

4.5.1.2 Installation


Components list
Unpack the unit and check that:
• The package contains all the components (see next table).
• All components are in perfect condition.
Otherwise, contact the manufacturer.
Receiver kit PC-ALH(N)
Connection cable
Flexible cable tie
Wiring cover
Installation and operation
manual

Installation procedure
C A U T I O N
Follow these installation procedures carefully. Failure to do so may cause the receiver to become detached from the panel causing a
serious accident.
1 Install the wireless receiver kit, indoor unit and air panel at the same time.
2 If the wireless receiver kit is installed after the indoor unit, unplug the power source from the indoor unit and remove
the air panel.
3 This receiver kit can be installed in positions 1, 2, 3 or 4.
4 Remove the cover from the electrical box of the
indoor unit and connect the cable to the terminal
plate (white) as shown below.
189
TCGB0106 rev.0 - 12/2014
Name
PCB
Connection
cable
Quant. Comments
1 With connection wire
1 -
3 For securing the cables
1 To protect the connection cable
1 Installation and operation unit instructions


Terminal plate (white)
Cable tie "A"
Cover
Air panel


Electrical box of the
indoor unit
Cable tie "B"
4