Sony RSE-500 Operating Instructions Manual page 42

Adjusting the Picture
O
3"
CD
"a
CD
ui
You can adjust a picture (zoom, pan, tilt, focus and
iris) or change the picture quality.
Changing the Quality of the
Picture Sent from a Remote Site
Operating the Camera
You can operate the camera with the camera
controller.
1
To operate a camera at the local site, select
LOCAL CAM CTR from the main menu.
To operate a camera at a remote site, select
REMOTE CAM CTR from the main menu.
The following .screen appears. (The illustration
below is for selecting LOCAL CAM CTR.)
— LOCAL
CAMERA CONTROL—
< + >
ZOOM
<•►>
PAN
<-*•>
<t> TILT
<♦>
< + > FOCUS <->
< + > IRIS
<->
<EXIT>
i
You can change the quality of the picture sent from a
remote site.
1
Select REMOTE PICTURE from the main menu.
The current picture quality setting is displayed in
the lower-left comer of the main menu.
Current setting
MENU LOCAL REMOTE
OFF
ALARM
ALARM
CAM SEL CAM SEL
DIAL
CAM CTR CAM CTR
LIST... P I/O P I/O
KEY... INFO... PAUSE
DISC...
HEADSET
LINE
MIC MIC
SETTING PinP iPICTUREl
BUSY
■FAST
2
Press ENTER.
Each time you press ENTER, the picture quality
setting is changed as follows.
|--»NORM FAST FINE
3
Select an item to set using 4', ♦, or ♦. Press
ENTER repeatedly to adjust the item.
The picture on the monitor is adjusted.
Move the cursor to <EXIT> using ■f. then press
ENTER.
The main menu appears.
FINE:
Gives picture quality preference than
picture motion.
NORM:
Middle setting between FINE and
FAST.
FAST:
Gives picture motion preference than
picture quality.
To adjust the zoom
Select <+> or <-> next to ZOOM,
To adjust the angle
Select <♦> or <♦> next to PAN or select <♦> or <♦>
next to TILT for the desired angle.
To adjust the focus
Select <+> or <-> next to FOCUS.
To adjust the iris
Select <+> or <-> next to IRIS.
I