Panasonic AG-6124 Service Manual page 7

Menu Screens
One of the menu screens appears on the TV monitor when the MENU/REC LOCK switch is set to MENU. The
display returns to the regular screen when this switch is set to OFF.
e When a menu screen has appeared, the items are set using the page, shift and set buttons.
« Advance through the pages ("page up") of the menu screen using the page button.
« Move the items (downward or toward the right) using the shift button.
« Change the items (increment or decrement the values) using the set button.
MENU SCREEN 1
In addition to the date and time display and the recording mode lock setting which appear on the TV monitor,
the hour meter is displayed on Menu Screen 1.
(TIME ADJUST) Pl @ Date setting (see page 12)
gis1z0bl gat @ Time setting (see page 12)
Oeer00 © Recording mode lock
(REC LOCK)
This indicates the unit's total operation time (the cumulative
total for the cylinder rotation time).
(HOUR METER)
000008
MENU SCREEN 2
The alarm recording mode is set on Menu Screen 2.
© Alarm recording mode selection (see page 26)
[ALARM P ; ; } :
¢ ) The recording mode in the event of an alarm input is selected.
geet a af (OFF > ALARM — EVENT)
eta: a oeur [as © Alarm recording time mode selection
When there is an alarm input during recording in the time
lapse mode, the recording time mode is switched to the des-
ignated mode, and the details of the alarm status are recorded
faithfully. (SH/6H)
@ Alarm recording duration setting
This sets the time efapsing from the start of alarm recording
until its end. This time can be set in 30-second increments
from 0.5 to 3 minutes. (0.5 - 1.0 > 1.5 > 2.0 3 25 >
3 — CONTINUE — MANUAL)
CONTINUE: Alarm recording continues until the tape end.
MANUAL: Alarm recording is performed while the alarm input
continues.
© Alarm recall (see page 28)
This checks the input times (up to 6) of the alarm signals.
10
MENU SCREEN 3
(VIDEO MODE)
MODE AUTO
SHARPNESS OFF sao
12/24H PLAY ON
matically.
REW —> REC: When the cassette is inserted, it is first rewound to
the start of the tape and then recording is started
automatically.
® Selection of operation when tape end is detected during recording
(see page 24)
STOP: Stop mode
REW: The tape is automatically rewound to the start where it stops.
REPEAT: The tape is automatically rewound to the start, and recording
is repeated.
@ Recording time mode selection
When recording starts, the set time mode is always established.
(OFF + 3H — 6H 12H — 24H)
OFF: Any time mode can be set using the TIME MODE button on
the front panel. It can be changed even while recording is in
progress.
® Video signal mode
This selects the operation of the colour/black-and-white automatic
selector circuit.
AUTO: The circuit automatically identifies the type of video input or
playback signals, and selects the colour or black-and-white
mode accordingly.
B/W: The black-and-white mode is forcibly established.
@® Playback picture quality selection
The outlines of the playback images can be emphasized.
OFF: Regular mode
ON: The playback picture has emphasized outtines.
@® 12-/24-hour time mode playback system
This selects the system in which a tape is to be played back in the
time tapse mode. It is set to ON for playing back a tape which was
recorded in the 12-/24-hour time mode.
MENU SCREEN 4
The intemal timer recording modes are set on Menu Screen 4.
@® internal timer recording mode setting (see page 19)
{INTERNAL TIMER REC) P4 This sets the weekly timer or daily timer recording mode. (OFF/ON)
e The menu screens are not displayed while the unit is playing back a tape.
1
APCD ATIAIC TRICO TDIIOTIAREG psp tot