Panasonic AG-6124 Service Manual page 16

er—t
Alarm Recall
The time when the alarm signal was input can be ascertained on the TV monitor by checking the alarm input
time in the RECALL item on Menu Screen 2.
| Step Selection and operation TV monitor display
Set the MENU/REC LOCK switch to MENU to display the menu
screens. Press the page button to display the alarm recording (ALARM)
setting screen (Menu Screen 2) on the TV monitor. MODE
T-MODE
OFF PLAY DURATION 0.5HIN
(RECALL) 01-10-95 20:19
- PAGE 30-08-95 08:40
25-06-95 04:14
05-05-95 09:25
Upon completion of the settings, set the MENU/REC LOCK
2 switch to OFF. The regular screen is restored. woiteieitoay
4:15:23
¢ The alarm recall function stores up to 6 alarm input times in the memory and displays them on the screen. If
there have been more than 6 inputs, they will be deleted from the screen in sequence starting with the oldest
data.
« When the RESET button is pressed while Menu Screen 2 is on the display, the alarm recalt memory can be
cleared.
28
When a multiple number of cameras are used for recording, the timing at which the sequential switcher automatically
switches the cameras can be controlled by this unit and the images of several cameras can be recorded.
Principle of camera switching
e In the 24-hour time mode, the cameras are switched
automatically at the position of the vertical syne signal
each time a video track is recorded.
¢ The camera switching interval differs according to
the time mode. (See page 16)
Video tape (with 24-hour time mode recording)
Connections (using the WJ-523 sequential switcher)
TV camera 1
To camera input aver
(BNC connector) EXT VU
Set the time adjustment
control EXT VTR.
Sequential switcher (front panel)
[-cs000 9
TV Monitor
To power outlet
Microphone
Notes on operation
¢ Synchronize the TV cameras for operation.
29