Table of Contents
Advertisement
(LONG] (GATE) REMAINING —_ |
xs
(REC
} (7OC } pgs time
10.08.48. "E
-dBoo 60
40
30
2
fg
8
6
4
TOP
a
MID
a
INPUT selector indicators
The DIGITAL IN OPTICAL or COAXIAL indicator lights
according to the position of the INPUT selector. No
indicator lights when the INPUT selector is set to the
ANALOG position.
SAMPLING FREQ. (Sampling frequency) indicator
48kHz: For recording/playback of analog input
signals (standard mode).
44.1kHz: For recording/playback of CD, a pre-
recorded DAT cassette or analog input signals.
32kHz: For recording/playback of analog input
signals (long-play mode).
REPEAT indicators
REPEAT 1: Lights when a desired selection is played
back repeatedly.
REPEAT ALL: Lights when ail the selections are
played back repeatedly.
AMS (Automatic Music Sensor)/RMS (Random
Music Sensor) indicators
Show the number of selections to be skipped ahead or
behind in the AMS operation. When designating a
selection directly by the numeric button and the B>
button, the display shows the program number of the
target selection while the selection is being searched
for. When programming the desired selections in the
RMS operation (page 39), the display shows the
program number of the selection to be programmed.
DISPLAY OFF/AUTO indicators
The DISPLAY OFF indicator lights when peak level
meters and margin indicators are turned off. The
DISPLAY OFF AUTO indicator lights momentarily
before all the indicators are turned off.
0 OVER
l
ewe
eS
wee
ee
ES Se
eSwseSeeeees
eos
$s
SHIFT A ZO
RENUMBE
WRITE URASE
[13] SKIP PLAY indicator
When this indicator is lit during playback, the portion
marked by the skip ID is skipped and playback
continues from the next start [D.
MUSIC SCAN indicator
Lights after the MUSIC SCAN button is pressed to
listen to the beginning of each selection successively.
CAUTION indicator
Lights when moisture condensation occurs. If this
happens, the deck stops functioning automatically.
(See page 4.)
START ID mode indicators
AUTO: Lights when the AUTO button is pressed to
write the start ID automatically.
RENUMBER: Lights when the RENUMBER button is
pressed to renumber the program numbers.
WRITE: Lights when writing the start ID manually.
ERASE: Lights when erasing the start ID.
AUTO RENUMBER: Lights when renumbering
program numbers automatically.
SHIFT RENUMBER: Lights when shifting the start ID
and program number position.
SKIP ID mode indicator
WRITE: Lights when writing the skip ID.
ERASE: Lights when erasing the skip ID.
END ID mode indicator
WRITE: Lights when writing the end ID.
ERASE: Lights when erasing the end ID.
11
Advertisement
Table of Contents
