Remote Notification - Hitachi HF-W6500 60 Manual

8. SIMULATING THE HARDWARE STATUS

8.1.5 Remote notification

This function notifies of the transition of the RAS software to simulation mode using trap
notification so that an SNMP manager that monitors this equipment in a remote location
can know that the hardware statuses it acquires and the trap notifications for hardware
failure (and hardware recovery) it receives are generated in simulation mode. In addition,
the object value for the operational mode of the RAS software is changed to the one for
the simulation mode.
NOTE
The contents of the hardware status that can be acquired and a trap notification
that can be notified are the same as in the normal mode. For details about the
objects of the extended MIB for HF-W, see "4.5 Remote Notification".
8-18