D Engine Access Hole Cover - Toyota Dyna100 EE 2012 Manual

Engine access hole cover
1. To open the engine access hole cov-
er, release the latches and raise the
cover.
NOTICE
Always stow the cup holder in the
instrument panel before opening the
engine access hole cover. If this is
not done, the cover will hit the cup
holder and damage it. (See "Cup hold-
er" on page 110 in Section 1−9 for
details.)
Dyna100/150_EE
KEYS AND DOORS
2. After lifting the cover up, hold it
open with the strap.
Before closing the engine access hole
cover, check to see that you have not
forgotten any tools, rags, etc.
CAUTION
Make sure the strap supports the
D
engine access hole cover securely.
After closing the cover, make sure
D
it is securely locked by pulling the
seat cushion upward.
17