Advertisement
The television can be programmed from a wide selection of
languages for on-screen dialogue. After a language has been
selected, all displays will appear in this language. German is
pre-set at the factory.
If you want to select a new language,
press the < a > button.
Activate the "ATS EURO. PLUS" on the menu:
Press the AP button until the line "ATS EURO PLUS' is
highlighted in blue.
Gail up country locations on the menu:
Press the OK button
Country
Germany is pre-set at the factory.
A: different. location
(country). can. be selected with the
< aed > button.
Starting the ATS EURO PLUS search function
Press the OK button. This starts the ATS EURO PLUS search
procedure. This procedure automatically sorts the available
channels.
When the search procedure is finished, the TV Station Table
is displayed on the screen.
Directions for CH (Switzerland), NL (the
Netherlands) and B (Belgium):
After selecting the location (country) and confirming this
choice with the OK button, this page is displayed.
Reception via:
Cable Offset
Select
Start
ATS
Cancel
— a
lf you have a normal
cable or aerial. system,
highlight
"Cable/Aerial' on the menu with button w P or AP.
Start the ATS. search procedure with the OK button. After the
search. procedure is finished, the TV Station Table is display-
ed on the screen.
If the unit is connected to a cable system which does. not
transmit at normal channel. separation (channe! frequency
arrangement), you must select."Cable Offset«.
in case of doubt, consult your dealer.
Press w P button
Press OK. ATS starts and stops at the first channel with suffi-
cient reception quality.
P 06...182,25 MHz
STORE
—->
OK
SEARCH
SSA
F-TUNE
=->
<>
lf necessary, you can adjust the quality of the picture by
pressing the < or > button.
Press the OK button to add the channel to the TV Station
Table.
If you do.no want to add the channel to the TV Station Table,
press. the AP
button. The ATS search procedure begins
again.
After.the search procedure is finished, the sorted TV. Station
Table is displayed on the screen.
Tuning instructions are continued. in the chapter "Changing
the sequence of the automatically sorted channel positions«.
30
Advertisement
