Automatic High Beam - Toyota VELLFIRE 2010 Manual

Machine Translated by Google
244 4-3. How to turn on the lamp and how to use the wiper
Automatic high beamÿ
The automatic high beam uses a camera sensor installed in the inner mirror to determine the
brightness of the lights of oncoming or preceding vehicles, street lights, etc., and automatically
switches between high beam and low beam.
How to use automatic high beam
Set the lamp switch to AUTO or and push
1
the lever forward
Press the automatic high beam switch
2
The automatic high beam indicator
light illuminates when the headlamps
are on.
Conditions for automatic switching between high beam and low beam
The high beams are turned on when all of the following conditions are
met: • Vehicle speed is about 30km/
h or more • It is dark in
front of the vehicle • There is no oncoming vehicle or preceding vehicle, or the lamp is not lit •
There is little light from the street lights along the road ahead
The low beams illuminate under any of the following conditions: • Vehicle
speed is about 25km/h or less • The
front of the vehicle is bright •
An oncoming vehicle or a preceding vehicle has its lamps on •
There is a lot of light from the street lights along the road ahead
ÿ: Equipment may or may not be available depending on the grade and options.