Editing Enumerated Values; Changing Time Settings In Lhmi; Saving Settings - Hitachi Relion 670 Series Operation Manual

1MRK500127-UUS Rev. M
IEC15000063 V1 EN-US
4. Edit the string using the on-screen keyboard.
5.
Select OK on the on-screen keyboard or press
the entered string is accepted and the editing dialog is closed.
5.1.13.3

Editing enumerated values

1. Activate the setting mode and select a setting.
When editing an enumerated value, the selected value is shown inverted.
2.
Press
One press changes the enumerated value by one step in the parameter specific order.
5.1.13.4

Changing time settings in LHMI

If there is a need to change the time setting in the LHMI ( Main menu /Configuration /Time /System
time /SYSTEMTIME:1 ) the change will take affect immediately. To confirm the new setting press
remove the change, press
5.1.14

Saving settings

Editable values are stored in the non-volatile flash memory. Most of the parameter changes take effect
immediately after storing, but some parameter changes require application restart. Values stored in the
flash memory remain in effect after reboot as well.
1.
Press
2.
Press
3.
To save the changes in non-volatile memory, select Yes and press
GUID-8D804426-35FD-48A8-9E63-CCBB625327EA V1 EN-US
Figure 30:
•
•
670 series
Operation manual
or to change the value of an active enumerated value.
.
to confirm any changes.
to move upwards in the menu tree or
IEC13000245-1-en.vsd
Confirming settings
To exit without saving changes, select No and press
To cancel saving settings, select Cancel and press
© 2017 - 2023 Hitachi Energy. All rights reserved
IEC15000063.vsdx
while the string editing field is focused to accept
to enter the Main Menu.
.
.
Section 5
Using the HMI
AMU0600417 v6
GUID-0EE1EA01-D75F-4F3E-825F-ACD59D5A160F v3
. To
GUID-80F52D5D-539E-478E-97AC-4E33897E5085 v6
.
47