LG HBP 16H Installation Manual page 13

3.2.2.5 QR Code Scan
The QR code scanning method is as follows.
Select
Prime: Fixed at 2
FLEX: Select from 2 to 4
S/N of consecutive QR
codes are automatically
displayed(Maximun 5)
When the QR code registration is complete, click the "Next" button.
If the scanned serial number matches the actual serial number, it will proceed to the next
section.
There are three (3) QR codes: Battery Control Unit, Battery Module A, and Battery Module B.
Wall Wall
3.2.2.6 External Internet Connection
"Next" button.)
3.2.2.6.1 Ethernet Connection (primary)
Connect the ethernet cable to a router with internet access.
For Ethernet use, it is enough to connect the cable. Since you have already connected the
1. Battery Control Unit QR Code
2. Battery Module QR Code
3.2.2.6.2 Wi-Fi Connection
If you are using an ethernet connection and do not wish to use Wi-Fi, simply click the "Next"
button.
Scan AP( ): Wi-Fi-network currently available for connection is displayed in
SSID( ): Enter the name of the Wi-Fi-network to connect(You can enter it manually without
going through .).
Password: Enter the password of the Wi-Fi-network to connect.
When internet connection is successful, click the "Next" button.
* In case the WLAN connection is unstable, enhance the signal by using a WLAN repeater.
Continent : Select your continent
Time Zone: Hour: Select your time zone.
RMD Power Save Timer: OFF(default)
RMD Operation Mode: Normal Mode(default)
Server Use: Choose whether the cloud server (external internet) will be used.
.
13