Programming Function Keys; Operating The Built-In Device - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

5.2.3

Programming function keys

Introduction
The specially designated physical buttons are preassigned with frequently used tablet
functions.
Procedure
1. Press the "Settings" icon in the HotTab toolbar.
2. Press ① to set the Function 1.
– ①: set the F1 icon
– ②: set the F2 icon
– ③: set F1 and F2 to the default function
3. Press ④ to set "Short press" application (short
press means press for less than 2 seconds).
4. Select one of the five alternatives for Function
1 key short press.
5. Press ⑤ to set "Long press" application (short
press means press for more than 2 seconds).
6. Select one of the five alternatives for Function
1 key long press.
7. Follow the same steps to set the Function 2.
Customize application for "short press" and "Long press"
If you want to program a function key as an application other than the application in the
function list for short or long press, press
installed, and select the application.
5.2.4

Operating the built-in device

Depending on the configuration, your device is equipped with various hardware features,
such as a camera and GPS. Not every device has all features.
You can check which hardware features are available along with their status. You can turn
individual radio modules, e.g. WLAN, on or off selectively, depending on the situation.
Hardware
feature
Camera
Wi-Fi
LAN
WWAN 4G/LTE
MD-34A
Operating Instructions, 08/2023, A5E52427535-AA
Entry Entry Plus
✓ ✓
✓ ✓
✓ ✓
✓
, browse to the folder where the application is
High End Automation
✓
✓
✓
✓
Operating the device
5.2 HotTab
Outdoor
✓ ✓
✓ ✓
✓ ✓
✓
53