General Safety Instructions - Siemens SIMATIC IPC MD-34A Operating Instructions Manual

for normal operation. Other measures, such as the use of security policies, should be applied
as needed.
2.3

General safety instructions

This device is compliant with the relevant safety measures to IEC, EN, VDE, UL, and CSA. You
can get information on reliability of use of the device in the intended environment from our
Service contact partners.
Quintessence
Observe safety instructions
Please note the legal information at the start of this document
You should not expand your device before you have read the relevant safety instructions.
Risk of the device falling
If the device falls, because it is accidentally let go, this can lead to personal injury or damage
to property.
Take appropriate safety precautions to prevent this danger.
Hazardous emission of light
For devices that are equipped with a camera, a camera LED for lighting and the camera's
flash are located on the rear of the device.
The camera LED has been assigned the Risk Group 2 (Groupe de Risque 2) according to
IEC/EN 62471 and can damage the eyes in case of improper use. The risk for the user
depends on the use of the camera.
Do not look directly in the light beam of the camera LED when using the camera.
Keep a distance of at least 20 cm between your eyes and the camera LED.
MD-34A
Operating Instructions, 08/2023, A5E52427535-AA
CAUTION
WARNING
CAUTION
Safety notes
2.3 General safety instructions
17