●Digital input control signal
You can select the detective level of the digital input, as shown below, to control the totalizer
and pulse output.
(Only when the digital input function is set for totalizer control input)
Selection items
L LEVEL
H LEVEL
●Changing the digital input function
The following is an example to change the Digital Input (DI) function from No use (NO
USE) to Totalizer Start / Stop (CNT ST/SP).
Switch operation
I:DI
1 DI FUNC
2 DET LVL
3 EXIT
DI FUNC
STEP1
NO USE
ESC
DI FUNC
STEP2
NO USE
DI FUNC
STEP3
CNT ST/SP
Digital input function setting
CNT ST/SP
(Totalizer START/STOP)
CNT RS/ST
(Totalizer RESET/START)
CNT ST/SP
(Totalizer START/STOP)
CNT RS/ST
(Totalizer RESET/START)
Display example
Select "DI FUNC" from the setting item
selection menu.
ESC
The current setting (NO USE in this
example) appears.
Then push
* Pushing
screen.
The switches at the bottom change.
(
At the same time, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push
You can continue to change the setting item.
Push
items.
When the desired item is selected, push
− 84 −
6 F 8 A 0 9 2 7
Totalizer control signal
H signal:Totalizer STOP
L signal:Totalizer START
H signal:Totalizer START
L signal:Totalizer RESET
H signal:Totalizer START
L signal:Totalizer STOP
H signal:Totalizer RESET
L signal:Totalizer START
Description
.
returns you to the menu
ESC
are shown.)
.
to change the selection
: Selected item is scrolled up.
: Selected item is scrolled down.
to set the item temporarily.