Toshiba LF620 Instruction Manual page 70

Switch operation
ESC
● Changing the range type
The range type should be set before changing the span.
The following is an example to change the range type from Single range (SINGLE) to
Bidirectional automatic selection of multiple ranges (2F-2R).
Switch operation
STEP1
STEP2
STEP3
STEP4
Display example
C:RANGE
Pushing
1 R TYPE
menu.
2 R1 3 R2
4 R3 5 R4
6 R HYS
7 EXIT
ESC
Display example
C:RANGE
Select "R TYPE" from the setting item
1 R TYPE
selection menu.
2 R1 3 R2
4 R3 5 R4
6 R HYS
7 EXIT
ESC
R TYPE
The currently set range type (SINGLE in
this example) appears.
SINGLE
Then push
* Pushing
ESC
R TYPE
The switches at the bottom change.
(
4F-0R
At the same, the cursor appears.
(The item indicated by the cursor is
highlighted.)
Then push
R TYPE
You can continue to change the setting item.
Push
2F-2R
items.
R TYPE
Perform this operation to change the setting
to 2F-2R.
2F-2R
When the item is changed to the desired
item, push
temporarily.
− 69 −
Description
returns you to the setting
ESC
Description
.
returns you to the setting
ESC
menu.
are shown.)
to change the selection
: Selected item is scrolled up.
: Selected item is scrolled down.
to set the item
6 F 8 A 0 9 2 7
.