If Your Engine Stalls While Driving - Toyota 4Runner 1996 Manual

Connecting point for 5VZ-FE engine
Connecting point for 3RZ-FE engine
154
WWW.MANUALS.WS
Do not connect it to or near any part that
moves when the engine is cranked.
NOTICE
When making the connections, do
not lean over the battery or acciden-
tally let the jumper cables or clamps
touch anything except the correct
battery terminals or the ground.
5. Start your engine in the normal way.
After starting, run it at about 2000 rpm for
several minutes with the accelerator ped-
al lightly depressed.
6. Carefully disconnect the cables in the
exact reverse order: the negative cable
and then the positive cable.
7. Carefully dispose of the battery cover
cloths—they may now contain sulfuric
acid.
8. If removed, replace all the battery vent
plugs.
If the cause of your battery discharging is
not apparent (for example, lights left on),
you should have it checked.
WWW.MANUALS.WS
If your engine stalls while
driving

If your engine stalls while driving

1. Reduce your speed gradually, keeping
a straight line. Move cautiously off the
road to a safe place.
2. Turn on your emergency flashers.
3. Try starting the engine again.
If the engine will not start, see "If your ve-
hicle will not start".
CAUTION
!
If the engine is not running, the
power assist for the brakes and
steering will not work so steering
and braking will be much harder
than usual.