Mitsubishi Electric MELSERVO MR-J2-A Product Specifications And Installation Manual page 60

2. OPERATION
2) 5-digit parameter
The following example shows the operation procedure performed to change the electronic
gear denominator (parameter No. 4) into "12345":
Call the display screen shown after power-on.
Fifth digit setting
Press MODE three times. Select parameter No. 4 with UP / DOWN .
Press SET once.
Press MODE once.
Press SET once.
• • • • • • • •
The screen flickers.
Change the set value
with UP / DOWN.
• • •
The set value is entered.
Press SET once.
Press UP or DOWN.
2– 29
Lower 4 digits setting
• • •
To the next parameter
2