A 3-party conference call cannot be monitored if the user performing Call Monitoring is connected via
QSIG (TIE).
PC Programming Manual References
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature—Call Monitor
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Executive—Call Monitor
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
→Option 2—Data Mode
→Option 3—Executive Override Deny
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 3—Executive
Override Deny
Feature Manual References
4.1.18 Conference
4.1.22 COS (Class of Service)
20.1.7 Unified Messaging—Automatic Two-way Recording for Manager
20.1.83 Unified Messaging—Two-way Record/Two-way Transfer
Operating Manual References
1.3.7 Call Monitor
1.5.1 Cellular Phone Features
4.1.7 Call Park
Description
An extension user can place a call into a common parking zone of the PBX. The Call Park feature can be
used as a transferring feature; this releases the user from the parked call to perform other operations. A
parked call can be retrieved by any extension user.
Conditions
•
Automatic Call Park
It is possible to select an idle parking zone automatically.
•
Retry
If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park, the originator
will hear a busy tone. Retrying is possible while hearing a busy tone by selecting another parking zone or
a vacant zone.
•
Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, the Call Park Recall tone will be
heard at the Transfer Recall destination assigned to the extension which parked the call. If the destination
is engaged in a call, the Hold Alarm will be heard.
•
If a parked CO line call is not retrieved within a preprogrammed time period (Default: 30 minutes), it is
automatically disconnected.
•
Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking zone.
Any flexible button can be customized as the Call Park button. It shows the current status of the preset
parking zone as follows:
Light pattern
Slow red flashing
Document Version 2017-06
A call is parked in the preset parking zone
Status
Feature Manual
4.1.7 Call Park
53