Panasonic KX-NS700 Feature Manual page 143

These numbers are referred to as "floating extension numbers" and can be assigned as a destination of
incoming calls, intercepted calls, etc.
This feature is also known as Floating Station.
Resource
Device External Pager
Outgoing Message
(OGM)
Simplified Voice
Message (SVM)
Analog Remote
Maintenance
ISDN Remote
Maintenance
Group Incoming Call
Distribution (ICD)
Group
PS Ring Group
VM (DPT) Group
VM (DTMF) Group
UM Group
The default floating extension number depends on the value specified for Numbering Plan in Easy Setup.
*1
A default floating extension number is provided only up to group 64. The floating extension number for groups 65 and higher must
*2
be set explicitly.
Conditions
•
Certain resources which are assigned a floating extension number can also be assigned a name.
Installation Manual References
5.4.1 Easy Setup Wizard
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Extension
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Main
→Floating Extension Number
→Group Name
11.7.2 PBX Configuration—[3-7-2] Group—UM Group—Unit Settings—Floating Extension No.
11.8 PBX Configuration—[3-8] Group—PS Ring Group—Floating Extension Number
13.2 PBX Configuration—[5-2] Optional Device—External Pager / Music on Hold—Floating Extension
Number
Document Version 2017-06
Description
Used as the destination for the Trunk Answer
From Any Station (TAFAS) feature. (→
19.1.1 TAFAS (Trunk Answer From Any
Station))
Used to play messages for callers via the
Direct Inward System Access (DISA) feature.
(→ 5.1.10 DISA (Direct Inward System
Access))
Used to access message boxes associated
with extensions. (→ 18.1.12 SVM (Simplified
Voice Message))
Used to access the PC programming mode
through a modem on a PC.
Used to access the PC programming mode
through the ISDN interface on a PC.
Used to call an ICD group. (→ 10.1.1 ICD
GROUP FEATURES)
Used to call a PS ring group. (→ 15.1.28 PS
—Ring Group)
Used to call a VM (DPT) group.
Used to call a VM (DTMF) group.
Used to call a UM group.
7.1.5 Floating Extension
Default
600 or 6000
*1
5 or 50 + two-
digit group
number
*1
591 or 5091
*1
599 or 5099
*1
699 or 6099
*1
6 or 60 + two-
digit group
number
*1*2
—
—
—
500 or 5000
*1
Feature Manual 143