145-2484
1. Parking brake
2. Cruise control
3. Lower the cutting units
4. Fast
5. Slow
1. Warning—do not operate this machine unless you are trained. 4. Tipping hazard—drive slowly when turning; do not turn sharply
2. Warning—wear hearing protection.
3. Thrown object hazard—keep bystanders out of the operating
area.
decal145-2484
6. Raise the cutting units
7. PTO—Off
8. PTO—On
9. Read the Operator's
Manual.
1. TEC power relay
2. Electrical power relay
3. Read the Operator's
Manual for fuse
information.
4. Key switch
133-2930
while traveling fast; only drive on slopes with the cutting units
lowered; always wear a seatbelt.
5. Warning—do not park on slopes; engage the parking brake,
lower the cutting units, shut off the engine, and remove the
ignition key before leaving the machine.
6. Warning—read the Operator's Manual; do not tow the
machine.
7
145-2519
5. Air-ride seat
6. Electrical power
7. Headlights
8. USB power point
decal145-2519
decal133-2930