Toshiba Satellite 110 Series Maintenance Manual page 143

5. Carefully insert your fingers between the mask and the LCD panel and pry open
the latches. Start with the four latches across the bottom of the display mask.
6. Continue unlatching the mask along the sides (four latches on each side) and at
the top (four latches).
Installing the Display Mask
To install the display mask, follow the steps below and refer to figures 4-30 and 4-31.
1. Set the display mask in place and secure the latches beginning with four latches
at the top of the display mask.
2. Continue along the sides (four latches) and bottom of the display (four latches).
NOTE: Support the back of the display with your hand when you secure the
screws.
3. Secure the display mask with four M2.5x6 screws.
4. Attach two rubber seals and two rubber cushions to cover the screws.
5. Install the optional PC card, optional memory card, and battery pack as described
in Sections 4.4, 4.3, and 4.2.
110 Series
Figure 4-31 Removing the display mask
4-33