Polaris RZR PRO R Service Manual page 89

3. Remove the arrestor from the end of the muffler.
4. Use a non-synthetic brush to clean the screen on the
arrestor. If necessary, blow debris from the screen
with compressed air.
5. Inspect the screen for wear and damage. Replace if
damaged.
6. Reinstall the spark arrestor. Torque fasteners to
specification.
TORQUE
Spark Arrestor Fastener:
8 ft-lbs (11 Nm)
7. Reinstall the rear bumper. Torque fasteners to
specification.
TORQUE
Rear Bumper Fasteners:
7 ft-lbs (10 Nm)
9940259 R02 - 2022 RZR PRO R / PRO R 4 Service Manual
© Copyright Polaris Industries Inc.
MAINTENANCE
2
2.15