To Configure Using A Debugger - HP 16600A Series User Manual

See Also
Example
To see a complete list of configuration items, type help cf. This
command displays:
M>help cf
cf - display or set emulation configuration
cf
cf <item>
cf <item>=<value> - set new <value> for specified <item>
cf <item> <item>=<value> <item> - set and display can be combined
help cf <item> - display long help for specified <item>
--- VALID CONFIGURATION <item> NAMES ---
proc - Set type of CPU16/32 Processor
procck - Set Clock Speed of Processor
dprocck - Display Default Clock Speed of Processor
rrt - Enable or Disable Restriction to Real-Time Runs
breakin - Select BNC break input option
trigout - Select BNC trigger output option
M>

To configure using a debugger

Because the HP emulation module can be used with several third-party
debuggers, specific details for sending the configuration commands
from the debugger to the emulation module cannot be given here.
However, all debuggers should provide a way of directly entering
terminal mode commands to the emulation module. Ideally, you would
create a file that contains the modified configuration entries to be sent
to the emulation module at the beginning of each debugger session.
Information about specific debuggers in Chapter 8, "Using the
Emulator with a Debugger," beginning on page 173.
Your debugger manual.
Solutions for CPU32
Chapter 6: Connecting and Configuring the Emulation Module
- display current settings for all config items
- display current setting for specified <item>
Configuring the Emulation Module
149