Main Power; Energy Saver And Energy Save Mode - Canon Perfect Binder-F1 User Manual

Main Power

This product has the Energy saver for controlling power. A breaker is also equipped
1
to detect over current and short circuits.
IMPORTANT

If the product does not operate, check if the breaker is OFF. See "Power does not Turn
On (Breaker Test)" ( P. 3-25).

To completely cut off the power to the binder, disconnect the power plug.

Energy Saver and Energy Save Mode

Turning on the Energy Saver (LED lights) enters the energy save mode and cuts
electric power in order to melt glue and adjust temperature. Use the energy saver
when you want to keep only the functions that transport paper (pass-through
transfer) to the next device operational, without performing binding.
The energy save mode also is entered automatically for the amount of time set on
the printer, when a prescribed amount of time has passed following completion of a
booklet, etc. To recover from the energy save mode, press the energy saver.
The time for entering the energy save mode following completion of a
booklet can be set from the printer.
Adjust the time for entering the energy save mode from the printer display. Consult the
manual that comes with the printer for the procedure.
The energy saver LED indicates the following.

Lit: Glue temperature adjustment is not being done, the binder is in energy save mode.

Flashing: Glue temperature is being adjusted to the correct binding temperature.

Off: Binding is possible, the glue is at the correct temperature for binding.
1-6

Main Power