Advertisement
5
Maintenance
During maintenance, be sure to shut down the running air conditioner and disconnect the circuit
breaker. Otherwise, there is a risk of injury and electric shock.
• Use a soft, clean, dry cloth to wipe the front panel and the surface of the horizontal louver.
• If the dirt cannot be wiped off, wet a cloth with warm water (below 40 ° C) and wring it out thoroughly before wiping it off.
REQUIREMENT
• Do not use alcohol, petroleum extract, banana oil, glass cleaner, abrasive powder, etc. Otherwise, the product may be
damaged.
• Do not use a cloth containing chemicals to wipe or contact this product for a long time. Otherwise, it may cause
deterioration or surface discoloration.
•
Removing horizontal louver
1
Gently bend the gray bearing and remove the central 2 shafts.
2
Gently bend the horizontal louver and remove the left shaft.
3
Pull the horizontal louver out of the right shaft.
EN-5
– 3 –
Installing horizontal louver
1
Please follow the reverse steps of removal.
2
Firmly insert two slats of the horizontal louver into the right shaft.
Insert the horizontal louver
into the right shaft
EN-6
Advertisement
