HP MSR 2000 Preparing For Installation page 15

Figure 7 MSR4080 mounting brackets
Installing the router to the rack
CAUTION:
The mounting brackets and rack shelf can support only the weight of the router. Do not place any object
on the router to avoid device damage.
To install the router to the rack:
Use a front mounting bracket to mark the positions of cage nuts, making sure they are at the same
1.
level.
Insert one edge of a cage nut into the hole. Use a flat-blade screwdriver to compress the other edge
2.
of the cage nut, and then push the cage nut fully into the hole.
Install other cage nuts to all the marked positions on the rack posts.
3.
v