Removal and Replacement Procedures— Microtower (µT) Chassis
6.9.2 Removing a Drive
1. Prepare the computer for disassembly
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on
3. Remove the front bezel
4. Disconnect the power and data cables from the back of the drive, as shown in the following
illustrations.
Disconnecting Optical Drive Cables
Disconnecting Diskette Drive Cables
6–16
(Section 6.1, "Preparation for
(Section 6.4, "Access
(Section 6.5, "Front
Bezel").
319865-008
Disassembly").
Panel").
Service Reference Guide, d300, dx6050