Computer Cover - HP Compaq dx6050 MT Reference Manual

8.5 Computer Cover

1. Prepare the computer for disassembly
Ä CAUTION: Before removing the computer access panel, ensure that the computer is turned off and that
the power cord is disconnected from the electrical outlet.
2. Loosen the two captive thumbscrews 1 that secure the computer cover to the computer
chassis.
3. Slide the computer cover 2 back about 1 inch (2.5 cm), then lift it off the unit.
To install the computer cover, reverse the removal procedure.
Service Reference Guide, d300, dx6050
Removal and Replacement Procedures— Desktop (DT) Chassis
(Section 8.1, "Preparation for
319865-008
Disassembly").
8–5