Using The Preset Cooking Modes; Power/Temperature Settings; Quick Start Cooking (Manual Mode) - Philips HD4917/00 Manual

EnglisH
10

Power/temperature settings

Low
Wattage (W) 400
Temperature 80
(°C)

Quick start cooking (manual mode)

1 Put the mains plug in the wall socket.
The appliance produces a 2-second beep.
,
The display shows '----' (Fig. 2).
,
2 Place the cookware on the cooking zone.
3 Press the Power on/off button once to switch on the appliance (Fig. 3).
The power-on light and the 'W' light go on. The display shows the default setting of
,
1400W (Fig. 4).
4 If you want to adjust the power level, press the + and - buttons (Fig. 5).
Note: You can also adjust the power level during cooking.
5 If you want to adjust the cooking time: (Fig. 6)
- Press the Hr:Min button.
- Adjust the time with the + and - buttons. (Fig. 7)
Note: When you press the + and - buttons briefly, the time increases or decreases by 1 minute. When you
press the buttons longer, the time increases or decreases by 5 minutes.
Note: You can also adjust the cooking time during cooking.
6 Press the Start button to start cooking (Fig. 8).
If you have not set a cooking time and/or power level, the appliance starts cooking at the default
settings (a cooking time of 5 minutes and a power level of 1400W).
The appliance starts cooking.
,
During cooking, the fan switches on to keep the appliance cool. When you switch off the
,
appliance, the fan remains on for approx. 1 minute and then switches off automatically.
During cooking, the display shows the power level (Fig. 9).
,
If you have set a cooking time, the display shows the remaining cooking time (Fig. 10).
,
When the cooking time has elapsed, the appliance beeps a few times.
,
The appliance automatically switches off and the power-on light goes out.
Note: If you want to stop cooking, press the Power on/off button. The appliance then switches off.
7 Unplug the appliance after cooking.

using the preset cooking modes

You can choose between 7 preset cooking modes.
1 Put the mains plug in the wall socket and press the Power on/off button to switch on the
appliance. (Fig. 11)
The power-on light and the 'W' light go on. The display shows the default setting of
,
1400W. (Fig. 4)
2 Press the button of the preset mode you want to use.
Mid
800 1200
120 160
1400 1600
180 200
High
1800 2000
220 240