2-2. REMOVAL OF MAIN PARTS
2-2-1. Removal of Back Light Ass'y
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the table ass'y. (Refer to section 2-1-2.)
3. Release harnesses from harness clamp and disconnect one connector (CN5) on PS-517 board.
4. Remove four screws (B3x10) and then remove back light ass'y.
VID-P110
screw
(B3x10)
Harness
clamp
screw
(B3x10)
Back light ass'y
PS-517 board
CN5
2-3 (E)