Canon FINISHER - D1 Service Manual page 72

CHAPTER 2 OPERATIONS
4. Last Sheet for Stapling
When jogging operation ends for the last sheet, the front and rear jogging plates operate to hold
the sheets; thereafter, the swing motor starts to rotate to move down the swing guide. Then, the
finisher controller PCB moves the stapler to suit the selected stapling position for stapling operation.
When stapling ends, the finisher controller drives the jogging motor to move the jogging plate 10
mm away from the sheet. Thereafter, the stack delivery motor (M7) rotates clockwise to discharge the
stack to tray B.
Stapled stack
2-46
COPYRIGHT © 1999 CANON INC.
Swing guide
Tray B
Stack delivery roller
Figure 2-505
CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Sort delivery roller
Knurled belt