Canon FINISHER - D1 Service Manual page 22

CHAPTER 1 GENERAL DESCRIPTION
4) When the staple cartridge has slid out on
its own, pick it on its left and right and
slide it out.
5) Shift down the tab of the staple cartridge.
6) Remove all staples which slid out of the
staple case.
7) Put the staple cartridge tab back to its per-
vious position.
8) Put the staple cartridge back to its initial
position, and close the front cover.
Reference:
When the cover is closed, the stapler
unit performs idle stapling several times
automatically to edge out the staples.
1-14
COPYRIGHT © 1999 CANON INC. CANON FINISHER - D1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 1-330
Figure 1-331
Figure 1-332
Figure 1-333