Chapter 6 - Electrical installation
6.8
Auxiliary power, control and serial communication cables
6.8.1
Further information
6.8.2
Cable entry
6-16 (22)
See Outline drawing in
on:
■
Project-specific cable entry
■
Distance between point of cable entry and terminals
See
Appendix D – Wiring diagrams
■
Designation, cross-reference and device-identification conventions
■
Terminal designations
The power feed for the auxiliary power supply must be protected with a
suitable circuit protection rated for the inrush current. For information,
see
Utility consumption list
The cabinet of the drive and the non-integrated transformer is in the
factory for top or bottom cable entry. The top and bottom cable entry is
covered by a blanking plate
cable glands.
Fig. 6-13
Cable entry for auxiliary and control cables
3BHS221906 ZAB E01 Rev. D
Appendix C – Mechanical drawings
for information on:
of the drive.
(Fig. 6-13: 1)
which can be used to install
2
1
ABB
for information
5k A UM