ABB
1.3
Possible residual risks
5k A UM
The following risks can arise from a drive system and pose a hazard to
people. These risks must therefore be taken into account by the system
integrator and / or the plant owner when assessing the risks of the
machinery.
■
Electric power equipment generates electro-magnetic fields which
can cause a hazard to people with metal implants and / or a
pacemaker.
■
Drive system components can move unintentionally when being
commissioned, operated, or serviced due to, for example:
■
Operation of the equipment outside the scope of the specifica-
tions
■
Incorrectly assembled or installed equipment
■
Wrongly connected cables
■
External influence on, or damage of the equipment
■
Wrong parameter settings
■
Software errors
■
Faulty hardware
■
Hazardous touch voltages can be present on drive system
components caused by, for example:
■
Operation of the equipment outside the scope of the specifica-
tions
■
External influence on, or damage of the equipment
■
Induced voltages by external equipment
■
Condensation on equipment components, or pollution
■
Faulty hardware
■
High temperatures, noise, particles, or gases can be emitted from
drive system components caused by, for example:
■
Operation of the equipment outside the scope of the specifica-
tions
■
External influence on, or damage of the equipment
■
Wrong parameter settings
■
Software errors
■
Faulty hardware
■
Hazardous substances can be emitted from drive system
components due to, for example:
■
Incorrect disposal of components
3BHS221906 ZAB E01 Rev. D
Chapter 1 - Safety
1-3 (6)