D-Link D DFL-500 DFL-500 Manual page 62

Network security firewall

Table of Contents

The destination address is the IP address of the remote network behind the remote VPN gateway.

If you are adding an encrypt policy for a VPN with a remote VPN client connected to the Internet, the

destination address should be the Internet address of the client computer.

•

Go to Firewall > Policy > Int->Ext .

•

Select New to add a new policy.

Adding an encrypt policy

•

Set Source to the VPN source address.

•

Set Destination to the VPN destination address.

•

Set Action to ENCRYPT.

Service is set to ANY and cannot be changed.

•

Configure the ENCRYPT parameters.

Select an AutoIKE key or Manual Key tunnel. For information about adding VPN tunnels, see

VPN Tunnel

Adding an AutoIKE key VPN tunnel

Allow

Select Allow inbound to enable inbound users to connect to the source address.

inbound

DFL-500 User Manual

and

Adding a manual key VPN

tunnel.

Table of Contents

Dfl-500