Front and back view of the DFL-500 NPG
Initial configuration
When the DFL-500 NPG is first powered on, it is running in NAT/Route mode and has the basic configuration
listed in
DFL-500 NPG initial power on
DFL-500 NPG initial power on settings
Operating mode:
Administrator account:
Internal interface:
External interface:
Connecting to the web-based manager
The web-based manager is the primary tool for installing and configuring your DFL-500 NPG. Configuration
changes made with the web-based manager are effective immediately without the need to reset the firewall or
interrupt service.
To connect to the web-based manager you need:
•
a computer with an ethernet connection,
•
Internet Explorer version 4.0 or higher,
•
a crossover cable or an ethernet hub and two ethernet cables.
To connect to the web-based manager:
•
Set the IP address of the computer with an ethernet connection to the static IP address 192.168.1.2
and a netmask of 255.255.255.0.
DFL-500 User Manual
settings.
User name:
Password:
IP:
Netmask:
IP:
Netmask:
Manual:
Default Gateway:
Primary DNS Server:
Secondary DNS Server:
NAT/Route
admin
(none)
192.168.1.99
255.255.255.0
192.168.100.99
255.255.255.0
192.168.100.1
207.194.200.1
207.194.200.129
12