Maintenance Tips 14~15 - Toshiba RAD-Y200H Instruction Manual

Maintenance Tips
Warning
No Wet Hand
Unplugging
Caution
Prohibited
Use soft and slightly damp cloth to wipe the Unit.
·Wipe dust off the Power Plug regularly.
·Remove stubborn dirt with soft cloth and neutral kitchen detergent.
·Clean Control Panel only with a dry cloth, and use no water.
·Do not use gasoline, thinners, alcohol, cleansing powder, or brush to
prevent deforming or scratching the Unit.
1
Pull out the Water Tank
from the Unit.
2
Remove the Water Tank Lid.
Lift the Lid to open.
14
Do not plug in or unplug the Dehumidifier with wet hand.
Doing so could result in electric shock.
Turn off the Unit and unplug the power cord
before cleaning it to prevent electric shock.
Do not remove the Float from the Water Tank.
Doing so could result in inoperability, leakage,
dampening surrounding objects, electric shock, and electric leakage.
Main Body
Water Tank
3
4
Water Plug
Water Tank Lid
Float
Water Tank Handle
5
Water Tank
Clean the interior and the Lid of the Tank.
Do not brush the Tank to prevent scratches.
Wipe dry the exterior of the Water Tank, put
the Lid back on and insert the Water Tank into
the Unit.Press down the Water Tank Handle and
Lid to ensure proper installation.
Insert the Water Tank back into the Unit.
Hold the Water Tank horizontally and push it
inside gently to install the Tank.
Water Plug
Water Tank Lid
Float
Water Tank Handle
Water Tank