Table of Contents
Advertisement
Chapter 2 Installation and Wiring
2.1
Installation (Installation to the extended slot)
Preinstalled the JTNI to the extended slot of the order at the shipment.
For the inserting or exchanging the JTNI to the extended slot of the typeFR,
refer to the maintenance manual of typeFR(6F8C1379) at chapter 2.2,
card installing to the extended slot of PCI Express.
6F8C1621
8
Before installing or removing the module, make
WARNING
sure that the typeFR unit is turned off.
Otherwise, it may cause an electric shock.
Do not touch the interior of the product except
WARNING
the switches.
It may cause an electric shock.
Install it under an environment that satisfies the
CAUTION
product specifications.
When installing it under an environment that does not
satisfy the product operating temperature range, apply
forced cooling with cooling equipment.
Before installation or wiring, remove the static
CAUTION
electricity from your body.
The static electricity accumulated in the human body
may cause failure of the product.
Do not touch the cables carelessly.
CAUTION
Applying stress to the cables may cause malfunction or
accidents.
Use a Phillips screwdriver.
CAUTION
To prevent damage to the screws, use a screwdriver
that is suitable for the screws.
Perform a notification check in the application
CAUTION
level using the transmission protocol.
Mandatory
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Mandatory
Advertisement
Table of Contents
