Table of Contents
Advertisement
1.3 Presentation of information
Standardized safety instructions, symbols, terms and abbreviations are used so
that you can use this documentation to work quickly and safely with your product.
These are explained in the following sections to help you understand them better.
1.3.1
Safety instructions
This document includes safety instructions before a course of action or a required
action whenever there is a risk of injury or property damage. Be sure to observe all
described safety precautions. Safety instructions are set out as follows:
Type and source of danger!
Consequences of non-compliance
„
Measures to prevent danger
...
„
• Warning sign: points out the danger
• Signal word: indicates the severity of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes the consequences of non-compliance
• Prevention: states how the danger can be avoided
Table 1: Types of risk according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
3 842 565 050/2019-11 APAS assistant K1100-10i V01.00.00 - V01.00.99, Bosch Rexroth AG
About this documentation
SIGNAL WORD
Meaning
Indicates a hazardous situation that will result in severe
injury or death if not avoided.
Indicates a hazardous situation that may result in severe
injury or death if not avoided.
Indicates a hazardous situation that may result in minor to
moderate injury if not avoided.
Property damage: The product or the surrounding area
could get damaged.
7/68
Advertisement
Table of Contents
