Audio Operations; Bluetooth® Audio; Audio Main Operation - Bosch AIVIH61L2 Manual

BLUETOOTH® AUDIO
. Some Bluetooth® audio devices may
not be recognized by the in-vehicle
audio system.
. It is necessary to set up the wireless
connection between a compatible
Bluetooth® audio device and the in-
vehicle Bluetooth® module before
using the Bluetooth® audio.
. The Bluetooth® audio may stop play-
ing when
— receiving a hands-free call.
— checking the connection to the
hands-free phone.
— connecting the hands-free phone or
the audio device.
— downloading the phonebook mem-
ory from the connected cellular
phone.
. Do not place a Bluetooth® audio de-
vice in an area surrounded by metal or
far away from the in-vehicle Blue-
tooth® module to prevent tone quality
degradation and wireless connection
disruption.
. While an audio device is connected
through a Bluetooth® wireless con-
nection, the battery of the device
may discharge quicker than usual.
Condition:
. This system supports the Bluetooth®
Advanced Audio Distribution Profile
(A2DP) and Audio/Video Remote Con-
trol Profile (AVRCP).
. Wireless LAN (Wi-Fi) and the Blue-
tooth® functions share the same fre-
quency band (2.4 GHz). Using the
Bluetooth® and the wireless LAN func-
tions at the same time may slow down
or disconnect the communication and
cause undesired noise. It is recom-
mended that you turn off the wireless
LAN (Wi-Fi) when using the Bluetooth®
functions.
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(39,1)
3. Audio system

AUDIO OPERATIONS

AUDIO MAIN OPERATION

Turning audio system on/off
The ignition switch must be in the ACC or
ON position to turn on the audio system.
Push <VOL/PUSH POWER> to turn on the
last audio source that was playing
immediately before the system was
turned off. To turn off the audio system,
push <VOL/PUSH POWER> again.
INFO:
The audio system can also be turned on
by turning <VOL/PUSH POWER> when the
system is turned off.
3-7