Voice Recognition - Bosch AIVIH61L2 Manual

8. Troubleshooting guide

VOICE RECOGNITION

Symptom
The system does not operate or fails to
interpret the command correctly.
The system prompts to repeat a command.
The system does not correctly recognize a
number spoken.
8-26
Condition:
Possible cause
The interior of the vehicle is too noisy.
The fan speed of the heater/air conditioner is
too fast.
The noise generated by driving the vehicle is
too loud.
The voice command is spoken in a low voice. Speak the command in a louder voice.
The timing of speaking a command is too
early.
The command is spoken too slowly.
Pronunciation is unclear.
The command is spoken too late after the
tone.
An improper command is spoken.
Too many numbers are spoken at once.
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(196,1)
Possible solution
Close the windows or have the other occu-
pants be quiet.
Decrease the fan speed of the heater/air
conditioner.
Reduce the vehicle speed.
Speak the command after confirming the
following: a voice guidance is announced, a
tone sounds, and an icon on the screen
changes from gray to orange.
Speak in a natural voice without pausing
between words.
Speak clearly.
Speak the command within 5 seconds after
confirming the following: a voice guidance is
announced, a tone sounds, and an icon on
the screen changes from gray to orange.
Speak the command or a number that is
displayed on the screen.
Speak a command that is shown in the
command list.
Place a pause between the appropriate digits
for correct recognition by the system. When
speaking a telephone number, place a pause
between area codes, dial codes, etc.