Position; Changing The Trim; Changing Marks - Canon CXDI-1 Operation Manual

7.7 POSITION

You can trim the image and perform geometric transformations here.

7.7.1 Changing the Trim

1
2
3

7.7.2 Changing Marks

1
2
Select the option to be adjusted.
Touch [ADJUST TRIM/ADJUST ROI] to select the range.
Set the range.
If [ADJUST TRIM] was selected, set the trimming area (→ page 68), and if [ADJUST
ROI] was selected, adjust the density adjustment area (→ page 69).
Move the frame.
Touch , , or to move the frame. A red frame is moved if [ADJUST TRIM] was
selected, and a red-purple frame is moved if [ADJUST ROI] was selected.
Select the mark name.
Touch to select from the list.
Enable the mark.
Touch and highlight (white character) [View]. When View is enabled, Annotation and
DICOM Output are enabled.
When Link Setting (→ Setup Guide) is set to [ENABLE], Link is displayed.
7. Processing the Image (QA Mode Screen)
POSITION Screen
– 81 –
Mark list window
Orientation button
Continued on the following page >>