Départ. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
9.2.3
Set the antenna on the Rear Cabinet
9.2.4
Set the vibrator in the Rear Cabinet
9.2.5
Set the subset in the Rear Cabinet
Press on Main board
On both sides to ensure that
the clips are will fastened
9.2.6
Set the LCD Gasket
© PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Service Repair Support
Insert the vibrator
COMPANY RESTRICTED
VY-V-640-204
Page : 33 of 42
Langue : EN
Date : 09/21/01
Place the LCD Gasket
VY-V-640-204