Table of Contents
Advertisement
Départ. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
Password parameter:
This parameter is provided by the operator and is set as follows:
Press OK to
set the
password
Gateway parameter (IP):
An IP address is used to recognize computers connected to a network. It is made up of 4 * 3 digits (8 bits) and separated by
points. Each computer has its own IP address. For W@P application, IP address is used to access the gateway. This parameter
is provided by the operator and is set as follows:
Press the OK to set the
gateway (IP parameter)
© PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Service Repair Support
Select IP Address
and press OK
COMPANY RESTRICTED
VY-V-640-204
Page : 24 of 42
Langue : EN
Date : 09/21/01
Enter the password
(when a password has been
recorded once, only some keys-
appears when going back again in
this menu)
Enter the IP parameter
And press OK
VY-V-640-204
Advertisement
Table of Contents
