Robotics Trainings System WS502
Obstacles in the area of movement of the robot!
Risk of damage to components!
First move the robot gripper manually to a position from which the desired
position can be safely approached.
Before you perform an automatic movement of the robot ensure that the
range of movement is free of obstruction.
Press the EXECUTE button
The robot moves to the coordinates stored in Position
Index "0" (as delivered condition: home position
coordinates).
10.11 Move the robot in jog mode
Obstacles in the area of movement of the robot!
The robot has no range limit. In manual mode there is the risk of damage to
components.
Before you perform a movement of the robot ensure that the range of
movement is free of obstruction.
Make the movements carefully and at low speed.
Proceed as follows to move the robot in jog mode:
Press the Manual button to switch to manual mode
Bosch Rexroth AG
Operation of the training system
CAUTION
CAUTION
45/64