Wiegand Reader On Acc-Ap - Siemens SiPass integrated Controller And Device Installation Manual

FLN Devices and Readers
3

Wiegand Reader on ACC-AP

3.10 Wiegand Reader on ACC-AP
34 | 38
● The ACC-AP has a 560-ohm pullup on the A+ line, which can make few
Wiegand readers incompatible. For example, the AR6111 MX reader is known
to be NOT working.
HID Wiegand readers are recommended to ensure compatibility and optimum
operation.
● The card technologies for DRIe in Wiegand Mode are listed in the Reader
dropdown list in the
following card technologies are supported:
– CustomWiegand
– AllHidProx
– Prox26Bit
– ProxAsco36Bit
– ProxCorp1000
– ProxSiemensEncr
– ProxSiemensStg
– MifareCsn32
– MifareCsn40
– WiegandBCD
– WiegandAscoFacility
– Indala27Bit
– Cotag27Bit
– Indala32Bit
– Prox36BitCodeCard
– Prox34BitCodeKey
– DigikeyProx
– NorwayPost
– MifareUID56
– SaltoWiegand34
– EricssonWiegand
– Europlex34Bit
– Remec37Bit
See the documentation in SiPass integrated software bundle for more information
on the following topics:
● Wiegand Readers connections with ACC-AP
ACC-AP Technical Manual
– See the
● Configuration ofWiegand Readers with ACC-AP through SiPass integrated
user interface
Configuration Client User Guide
– See the
Configuration
tab of the
FLN Configuration
dialog. The
A6V11164550